Visual Precision - GTCO Cordless Roll-Up digitizers

CORDLESS ROLL-UP™ - THE PORTABLE DIGITIZER SOLUTION

Overview

Flexible, rugged digitizers for Cost Estimating, CAD, Mapping and GIS Applications.

Convenient - The Roll-Ups unobtrusive thin profile design (3.2mm thick) makes it ideal for use on a desk or drafting table - no special stand is required.

Easy to use - The Cordless Roll-Ups simple "plug'n play" installation enables immediate connection to a PC for a wide variety of applications (including our Easygrid™ and EasyEarthworks™ applications). Software configuration is accomplished with GTCO's exclusive SuperSet" Menu (shown below) in just one simple step, allowing the user to quickly switch between applications.

Flexible dual orientation - The Cordless Roll-Up can be configured with the controller housing oriented on the right or left edge of the tablet.

Durable and dependable - Built with advanced materials, including a tough Lexan" work surface, the Cordless Roll-Up will lay flat, maintain a smooth work surface and continue to perform to factory specifications after being rolled and unrolled thousands of times. It's backed by a one year RTM warranty and the same service and quality that have made GTCO a leading worldwide supplier of digitizers for over 20 years.

At a glance

	Two sizes 30x36" (just over A1) and 36x48" (A0)		Can run off suitable computers without power source
	Full set of drivers for wide platform/ application connectivity		4 and 16 button cordless cursors with stylus alternative
	Easily rolled for transport or storage		Left and right hand format easily switched
	Stylish optional carry case		Standard USB & RS-232 connection

Technical

Thickness:	3.2mm (1/8 in)
Roll diameter:	203 mm (8 in) recommended
Active Area:	Model 3036: 762 x 914 mm ( 30 x 36 in) Model 3648: 914 x 1219 mm ( 36 x 48 in)
External Dimensions:	Model 3036: 889 x 1118 mm ( 35 x 44 in) Model 3648: 1041 x 1422 mm ( 41 x 56 in)
Weight:	Model 3036: 2.7kg (6 lbs) Model 3648: 3.3kg (7.25 lbs)
Resolution:	0.010 mm (0.004 in)
Proximity:	12.7mm (0.5 in)
Power requirements:	220-240v (100v and 120v options) [only required for Serial connections]
Output Formats:	GTCO Type 5/5A Binary and ASCII, Summagraphics Microgrid, CalComp 9500
Hardware interface:	USB & RS-232 Serial connection
Drivers:	PC Driver: Industry standard Wintab driver for Windows 3.1 and 95, DOS mouse driver and AutoCAD ADI drivers
Pointing tools:	Cursors: 4 and 16 button MaxVu™ cursors (optional) Stylus: Side and tip switched stylus (standard) Pointing devices require a 3.5V lithium battery
Operating temperature:	5ºC to 46ºC (40ºF to 115ºF)
Storage temperature:	-18ºC to 66ºC (0ºF to 150ºF)
Source of Manufacture:	USA

What we say

Based on the reliability of the Roll-Up II, the Cordless Roll-Up is destined to follow in it's corded alternatives footsteps. If you're after a mobile solution which is not going to get much abuse, look no further - the cordless aspect just gives it even more agility (if the tablet is going to heavy use look at the Roll-Up III). The tablet comes in a substantial armoured tube which is ideal for storage purposes and has a flame red carry case as an optional extra, just what you need if you're using the system on the move.

Setting the system up is very simple and on many computers you only need connect one cable to the computer for the system to work, power being drawn from the computer connection itself rather than from a power transformer plugged in the mains. The cursors are well built and responsive and are based on the already proven design of the Roll-Up III corded model. The only difference is you need a battery occassionally to keep them going!

GTCO digitisers are the only roll-up solutions we'll sell - need we say more.

For further information, stock availability and prices contact:

Visual Precision Limited
2 Sycamore Tree
Elmhurst Business Park
Park Lane
Elmhurst
Staffordshire
United Kingdom
WS13 8EX
Tel: +44 (0)1543 262 222
Fax: +44 (0)1543 262 777
Email:Sales@VisualPrecision.co.uk